Seagate ST9100A Manuale Utente Scaricare il pdf (Pagina 3)

200 MB of free hard disk space is required for installation.

Additional disk space is needed for operation of

applications and for storing recorded data in files. As a

rule of thumb, the drive that saves the trace should have

more than 3 times the size of the recorded trace available.

For example, for a 4GB trace, at least 12 GB of disk space

should be available.

Defragmented drives will have better performance. Hard

disks with fast access times, such as SSDs, are

recommended. The hard disk has been shown to have the

most impact on trace save performance.

Display:

To take full advantage of the rich visualization and

analysis of Teledyne LeCroy software it is recommended

that the display is set to at least 1050 lines of vertical

resolution with at least 24-bit color depth.

The minimum requirement for the display is a resolution of

1024x768 with at least 16-bit color depth.

In Windows 7 and up, please use the “Smaller – 100%

(default)” setting under Control Panel -> All Control Panel

Items -> Display.

Connectivity:

To optimize trace saving performance, a Gigabit Ethernet

interface is recommended.

There is no connectivity requirement if the analyzer

application is used only to view pre-recorded traces.

If multiple analyzers are cascaded together, one USB port

(or one Ethernet connection) per analyzer is needed.

Cascaded traces are proportionally larger than traces

captured with a single analyzer.

The time required to save and display larger traces can be

reduced by:

- Using a system with a fast, defragmented SSD or

Hard Disk, with lots of available space.

- Increasing system memory, and

- Using a system with a faster processor.

3. Installation

Please refer to the “Installing your Analyzer” chapter of the

User's Manual for the details of SAS/SATA Protocol

Suite™ software installation.

3.1.

CD-ROM Installation

 Insert the CD ROM with the Analyzer software in the

CD ROM drive.

 The installation will automatically start unless the Auto

Run is turned off. In this case select the CD ROM from

“My Computer” and double-click Autorun.exe

 From the CD ROM Autorun program, choose the

Install Software menu item and then choose SAS or

SATA Software.

 Follow the on-screen instructions to complete the

installation.

1 2 3 4 5 6 7 8 ... 48 49

Commenti su questo manuale

Nessun commento

Seagate ST9100A Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi no Seagate ST9100A