Seagate ST200FP0021 Specifiche Pagina 11

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 86
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 10
HDD Installation
1. To install a hard drive, power off the DVR & use a Phillips screwdriver to remove the cover.
2. Remove the brackets you are going to use from the DVR using a Phillips screwdriver.
3. Secure the hard drive to the brackets that you removed using the provided screws and a
Phillips screwdriver.
4. Place the hard drive you connected to the brackets back into the DVR, and secure it with a
Phillips screwdriver.
5. Plug in the SATA cable(s) and power cable(s) to each HDD.
Each of the hard drives must be formatted before it can be used to record video/audio.
Note: If you install a DVD burner (not included) it must be connected to SATA #6 connector on the
16 Channel DVR, or the SATA #2 connector on the 4 or 8 Channel DVR.
Refer to page 39 for instructions on how to format the HDDs.
16 Channel Model
8 Channel Model
11
Vedere la pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 85 86

Commenti su questo manuale

Nessun commento